facebook

tweeter

in

you

Characteristicsdownload

Characteristics * Proton MRL
Duty load ( kg ) 400 630 800 1000
Capacity(person) 5 8 10 13
Height ( м ) 99
Stops 48
Entrances 1 / 2 (opposite)
Speed ( m/sec ) 1 - 1,6
Drive (Motor) Gearless / VVVF
Controller Down collective / Full Collective Selective
Min .pit’s depth ( mm )

800 ( U =1 m/sec)
1000 ( U =1,6 m/sec)

Min. overhead height

2900

(pit’s depth 1400 mm/ U = 1,0 m/sec / door’s height : 2000 mm

* For more detailed information please contact the engineers of PAPPAS elevators & escalators

arrow

Planning datadownload

Kgpersonmax. height (м)max.stopsspeed (m/sec)Entrancesmin door’s width *1 (mm)min shaft width*2 (mm)min shaft depth*2(mm)min pit (mm)min overhead height(mm)Car’s dimentions, quick calculator
Car’s width=shaft width - (___) (mm)Car’s depth =shaft depth - (___) (mm)
400 5 99 48 1 1 700 1290 1400 800 2900 550 330
400 5 99 48 1 2 (opposite) 700 1290 1400 800 2900 550 520
400 5 99 48 1,6 1 700 1290 1400 1000 3100 550 330
400 5 99 48 1,6 2 (opposite) 700 1290 1400 1000 3100 550 520
630 8 99 48 1 1 800 1440 1550 800*3 2900*3 550 330
630 8 99 48 1 2 (opposite) 800 1440 1550 800*3 2900*3 550 520
630 8 99 48 1,6 1 800 1440 1550 1000*3 3100*3 550 330
630 8 99 48 1,6 2 (opposite) 800 1440 1550 1000*3 3100*3 550 520
800 10 99 48 1 1 900 1590 1650 800*3 2900*3 600 330
800 10 99 48 1 2 (opposite) 900 1590 1650 800*3 2900*3 600 520
800 10 99 48 1,6 1 900 1590 1650 1000*3 3100*3 600 330
800 10 99 48 1,6 2 (opposite) 900 1590 1650 1000*3 3100*3 600 520
1000 13 99 48 1 1 900 1590 1650*4 800 2900 600 330
1000 13 99 48 1 2 (opposite) 900 1590 1650*4 800 2900 600 520
1000 13 99 48 1,6 1 900 1590 1650*4 1000 3100 600 330
1000 13 99 48 1,6 2 (opposite) 900 1590 1650*4 1000 3100 600 520

*1 for 2 panel door with telescopic opening

*2 the given measurements are the min. possible and are neither standardized nor recommended. There are opportunities of different shaft combinations. It also must be mentioned that min. shaft depth and min. shaft width can’t exist together for this range of duty load of the elevator. For the optimal dimensions of the shaft and cabin contact the engineers of the company PAPPAS
elevators & escalators

*3 This refers to the min. dimensions of the overhead space and pit simultaneously.

*4 If the pit’s depth is 800 mm and the overhead height is 2900 mm the shaft width
must be 1900mm

For more specific information contact engineering department of the company PAPPAS elevators & escalators.

arrow arrow

Certification

Proton mRL is certified and specialized for the Russian market.


Download certification 1

Download certification 2

arrow arrow

Stress – test

stress1stress1

 

We continuously perform optimization of the elevator’s structure components.

It is very important for the structure to be rigid in order to give the best possible riding comfort and the same time to be lightweight.

Using the fine-elements method we perform hundreds of tests for the best possible combination keeping the safety factor higher than the required.

arrow